What a slope planting has to do
A slope planting has two jobs. The plants need to cover the soil so raindrops and running water can’t strip it, and their roots need to hold the soil together below the surface. Plenty of plants do the first job. Fewer do the second well. Fibrous, spreading roots usually hold shallow soil better than a few thick taproots.
Plants also take time. A newly planted slope is at its most vulnerable in the first season or two, before the plants have knit together. Much of the work on a slope is protecting the soil while the plants fill in, which is why establishment methods matter as much as the plant list.
Start with steepness and the site
Before choosing plants, look at the slope itself.
- Steepness. Slopes are often described as a ratio, such as 3:1, which means 3 feet of run for every 1 foot of drop. Slopes steeper than about 3:1 get hard and risky to mow, so they are better suited to ground covers, grasses or shrubs than to lawn.
- Sun and shade. Full-sun banks and shaded banks need different plants. A plant that thrives in sun may thin out or die in shade, and the reverse.
- Soil. Clay, sand and rocky soil behave differently. See plants for clay slopes and covering a rocky slope, and for difficult soil generally, ground cover for problem soils.
- Water. Find out where water comes from. A roof downspout or a driveway draining onto a bank can cause damage that no plant can fix. Redirect the water first.
Ground covers that work on slopes
These are commonly recommended for slopes. Always check what is suited to your region and what is considered invasive locally.
Sun, well-drained soil
- Creeping juniper: a tough evergreen that spreads wide and is widely used on banks.
- Creeping phlox: a spring-flowering mat, good on well-drained slopes.
- Sedum (stonecrop): drought-tolerant, suited to thin or rocky soil.
- Creeping thyme: low, fragrant and tolerant of dry conditions.
- Bearberry (kinnikinnick): a tough native in many cold regions, suited to poor, sandy or rocky soil.
- Gro-Low fragrant sumac: a low-growing shrub that spreads by suckers and is often used on banks.
Shade or part shade
- Liriope and dwarf mondo grass: grass-like and dense, though they can be slow to fill in.
- Wild ginger, foamflower, Allegheny spurge and green-and-gold: woodland plants suited to shaded banks in the eastern US.
- Ajuga: spreads quickly, though it can escape into lawns.
Use with care
- Vinca (periwinkle), English ivy and crown vetch can hold soil well, but they are listed as invasive in parts of the world. Check local lists before planting, and see invasive ground covers to avoid. Many gardeners now choose native alternatives.
For low-effort sunny banks specifically, see sunny slope ground cover that needs little care.
Cold climates (zone 4)
In cold climates, winter hardiness and freeze-thaw cycles matter. Plants often used in cold regions, such as Edmonton and the Prairies, include creeping juniper, bearberry, Gro-Low sumac, creeping phlox, hardy sedums and native grasses such as little bluestem and switchgrass. Shrubs such as red-twig dogwood are also used on banks. Check each plant’s rated hardiness against your zone, and remember that a slope in an exposed spot may be colder and windier than your zone suggests. See grasses that prevent soil erosion and shrubs for hillside erosion control.
Western North Carolina and the southern Appalachians
Western NC has steep terrain, heavy rain events and a lot of clay-based soil. Native and regionally suited plants commonly suggested for banks there include green-and-gold, foamflower, Allegheny spurge, wild ginger, native ferns and, in sun, native grasses such as little bluestem and broomsedge. Shrubs such as fragrant sumac and native viburnums are sometimes used on larger banks. A local Cooperative Extension office or native plant nursery can tell you what suits your elevation and exposure.
Australia
Australian conditions vary widely, so local advice matters. Native ground covers often used on slopes include:
- Lomandra (tussock-forming, widely used for stabilising banks)
- Creeping boobialla (Myoporum parvifolium)
- Running postman (Kennedia prostrata)
- Hardenbergia (purple coral pea)
- Kidney weed (Dichondra repens), which also tolerates some shade
- Native violet (Viola hederacea), for damp shade
Some imported succulents used in the past, such as certain pigface (Carpobrotus) species, are weedy in some areas. Check your state or council weed lists, and ask a local native nursery what suits your soil and rainfall.
Can you walk on it?
Few ground covers tolerate heavy foot traffic (see walkable ground cover), and a steep slope is a poor place to try. Creeping thyme, Corsican mint, kidney weed and similar low plants cope with occasional steps. Plan a path or steps rather than expecting a planted bank to double as a walkway. Loose or wet soil on a slope is also a slip hazard.
Beyond ground cover: grasses and shrubs
Ground covers are not the only option. Deep-rooted grasses can anchor soil, and shrubs can stabilise steeper or larger slopes, often at a lower long-term maintenance cost. A mix tends to work well: shrubs or grasses for deep roots, ground cover to fill the gaps.
Establishing the planting
The “3-year rule” often quoted by gardeners is “sleep, creep, leap”. In the first year a plant mostly builds roots, in the second it spreads, and in the third it takes off. A new slope planting therefore needs temporary protection and patient watering.
- Plant in staggered rows rather than straight lines down the slope, so water doesn’t follow a bare channel between plants.
- Cover bare soil between plants with an erosion control blanket or mulch.
- Water deeply and regularly through the first season.
- Pull weeds early, before they compete with young plants. See controlling weeds while ground cover establishes.
The full process is in our step-by-step guide to planting ground cover on a steep slope.
When plants are not enough
Plants can’t fix every slope. If a slope is actively sliding, has deep gullies, or sits above a house, road or driveway, get advice from a local professional, such as a landscape contractor, civil engineer or your county conservation office. Retaining walls, drainage work and regrading may be needed. Creek banks and culvert areas can also fall under local rules. See how to stop erosion in a creek and culvert and drainage ditch landscaping.