Choosing and Planting

Controlling Weeds While Ground Cover Establishes

How to stop weeds in new ground cover: clear the bed first, plant densely, mulch between plants and weed regularly until the plants close over.

On this page
  1. Short answer
  2. Clear the ground first
  3. Plant densely
  4. Mulch between plants
  5. Weed regularly
  6. What to avoid
  7. A rough timeline

Short answer

Clear the bed of perennial weeds before planting, plant at a sensible density, cover bare soil between plants with mulch, and weed by hand regularly for the first one to two seasons. Once ground cover has closed over, the dense growth shades out most new weeds, but until then the gaps are an open invitation.

Clear the ground first

Weeds that already have deep or creeping roots, such as bindweed, couch grass, ground elder and dandelions, are far easier to remove before planting than after. Dig them out, removing as much root as you can, or smother the area with cardboard and mulch for several months. If the bed is replacing lawn, see how to kill grass before planting ground cover. Leave time for any regrowth to show itself and remove it. Planting into an infested bed means you will be pulling weeds out of the roots of your new plants.

Plant densely

The faster plants meet, the sooner weeds run out of light. Use the closer end of the recommended spacing if weeds are a problem; see ground cover plant spacing and how many plants you need. A UK landscaping firm puts it neatly: plant for the first year, not the fifth.

Mulch between plants

A layer of organic mulch such as composted bark, leaf mould or well-rotted compost blocks light from weed seeds and keeps soil moist.

  • Apply a layer of roughly 5 cm (2 in), up to 7 cm in some advice.
  • Keep it a few centimetres clear of plant stems and crowns.
  • Top it up in spring while plants are still joining up, since mulch breaks down.
  • On slopes, loose mulch can wash away; see erosion control blanket vs mulch.
  • Water before mulching if the soil is dry.

On large areas, overlapping cardboard under mulch is a low-cost way to suppress existing weeds. Cut holes or plant through slits. See ground cover vs mulch for more on how the two work together.

Weed regularly

Check the bed every couple of weeks in spring and summer. Small weeds pull out easily, especially after rain. Remove them before they flower and set seed, as one season of seeding can mean many years of weeds. Learn what your ground cover looks like as a seedling so you do not pull it by accident; self-sown seedlings of plants such as lady’s mantle can be confusing.

What to avoid

  • Plastic weed membrane under ornamental ground cover. Many gardeners find it stops plants spreading and roots from reaching soil, and weeds often grow on top of it as mulch breaks down.
  • Digging between plants. It brings fresh weed seed to the surface and can damage roots.
  • Herbicides near new plants. Some can harm ground cover, and spot treatment is hard in dense planting. If you use one, follow the label.
  • Letting runners and mats bury seedlings. Trim back vigorous plants such as aggressive ground covers if they smother neighbours.

A rough timeline

  • Before planting: clear perennial weeds and mulch.
  • First season: weed every couple of weeks and water well.
  • Second season: top up mulch in spring and weed less often as plants meet.
  • Later: an occasional tidy; gaps may still need weeding.

Timing matters for success, so plant at the right time; see when to plant ground cover. If grass is invading an existing planting, see how to get grass out of juniper ground cover.

The complete guide to choosing and planting

Types of Ground Cover Plants: Mat-Forming, Mounding and More
Read the guide

Keep exploring

Guides from other topics

All topics →