First rules: keep the water moving
A culvert or ditch exists to carry water. Any landscaping should keep it clear and avoid pushing water somewhere harmful. Before you start:
- Check who owns and controls it. Roadside ditches and culverts at driveways are often in a public right-of-way, and many counties or municipalities have rules on what you can change, plant or fill. Ask your local roads, public works or conservation office, especially before altering a pipe, an inlet or an outlet.
- Don’t block, narrow or fill the channel. Boulders, dense plantings or mulch in the flow path can cause water to back up or flood the road or your property.
- Expect big storms. Plan for the water to run fast and carry debris on occasion.
Landscaping the ends of a culvert
Culvert ends are where erosion usually starts, because water speeds up leaving a pipe and scours the soil.
- Rock aprons. Angular stone or riprap placed at the outlet slows the water and protects soil. A layer of geotextile fabric under the stone helps keep the soil from washing out through the gaps.
- Stone-framed edges. Larger rock around the opening can give a tidy look, as long as it leaves the pipe opening and flow path clear.
- Plant beside, not in front. Place plants on the banks and sides, set back from the opening.
- Don’t cover the pipe. Pipes need to be inspected and cleared of debris.
Planting a drainage ditch or swale
A shallow, grassy swale can slow and filter runoff, and plantings make it look more like a garden feature.
- Grass lining. A dense grass lining protects the bed from scouring. Seed or sod, with an erosion control blanket while it establishes.
- Wet-dry tolerant plants on the bottom and lower sides, which flood occasionally and dry out in between. Many rain garden ground covers suit this zone.
- Drier-loving plants higher on the banks.
Plants that suit ditches
Choose plants suited to your climate, and check which are native or invasive where you live. Beside a road that is salted in winter, pick salt-tolerant ground cover.
- Sedges and rushes (native Carex and Juncus) for the damper bottom.
- Switchgrass and other native grasses for sides and tops. See grasses that prevent soil erosion.
- Blue flag iris, swamp milkweed and similar natives where soil stays moist.
- Shrubs such as red-twig dogwood or willow on the upper bank, set away from the pipe, as roots can invade or block drains. See shrubs for hillside erosion control.
Keep trees and large woody plants away from pipes and outlets, where roots and fallen leaves can cause problems.
Stabilising the bank
Where banks are steep or already eroding, regrading them to a gentler slope helps plants take hold. Pair that with ground cover and mats. See ground cover for steep slopes and, for a natural stream, how to stop erosion in a creek.
Maintenance
- Clear leaves, sediment and debris from the pipe and channel, especially before and after heavy rain.
- Re-seed or patch bare spots quickly.
- Mow or trim grasses on a schedule that suits the species, without scalping the soil.
- Check the pipe ends after storms for undercutting or movement.
Concrete culverts and backfill
If you are installing or replacing a pipe, the material around it matters. See what to backfill a culvert with. A culvert that is failing or undersized is a job for a qualified contractor, since flow and road safety are involved.