Choosing and Planting

How to Get Grass Out of Juniper Ground Cover

Grass growing through your junipers? Learn safe ways to remove it by hand, cautions about herbicides, and how to stop lawn grass coming back.

On this page
  1. Why grass grows in junipers
  2. Before you start
  3. Removal methods
  4. A word on herbicides
  5. Keeping grass out
  6. Juniper FAQs

Why grass grows in junipers

Junipers form dense, low evergreen mats, but grass seed and creeping grass runners can still find their way in, particularly along the edge of a lawn or where the juniper is young and open. Once grass roots tangle with a juniper’s branches, mowing and edging cannot reach them, and the grass keeps growing under the foliage where light is limited but not absent.

Before you start

Junipers do not like heavy handling. Branches can snap, and cutting into bare, woody growth with no green foliage will not usually produce new shoots. Work gently, wear gloves and long sleeves (juniper foliage can irritate skin), and avoid compacting the soil around the roots.

Removal methods

Hand pulling. Pull grass when the soil is damp, getting hold of the base and lifting the roots. Pull small tufts early, since large clumps are harder to free without disturbing the juniper.

Cut at the base. For grass tangled deep in the branches, cut it as close to the soil as you can with scissors or shears. Regrowth is likely, so repeat several times through the season to weaken the roots.

Lift and replant. For badly infested plantings, you can lift the juniper, shake or wash grass roots out of the root ball, clear the ground thoroughly and replant. This is easier with small junipers and cooler weather.

Smother the surrounding area. Cardboard or heavy mulch around the edge of the bed can stop grass spreading in from outside. Keep it off the juniper’s trunk base.

A word on herbicides

Be cautious. A non-selective weedkiller such as one containing glyphosate can damage or kill a juniper if it touches the foliage. Some herbicides labelled as grass-selective can be used around certain ornamental plants, but suitability depends on the product, the juniper and local regulations. If you choose to use one, read the label closely for juniper or conifer use, apply on a calm day, shield the juniper and follow all directions. Many gardeners prefer to stick with hand methods to avoid risk.

Keeping grass out

  • Mulch the bed with a layer of bark or wood chips a few centimetres (about 2 inches) deep, keeping it clear of the trunk. See ground cover vs mulch for the pros and cons.
  • Edge the bed with a spade-cut trench, metal or plastic edging so lawn grass cannot creep in. Re-cut it once or twice a year.
  • Fill gaps early. Young junipers can take years to close over, so weed regularly while they do; these weed control principles apply to new plantings too.
  • Space plants properly. Closer planting closes gaps sooner; see ground cover plant spacing.

Juniper FAQs

When should I trim junipers? Light shaping is usually done in late spring to early summer, and only into green growth. Avoid heavy cuts into brown wood, because it often does not regrow.

Are juniper roots invasive? Creeping junipers have fibrous, spreading roots that help hold soil on slopes (see shrubs for hillside erosion control), but they are not generally regarded as invasive in the way tree roots can be.

How tall does common juniper get? It varies enormously. Common juniper (Juniperus communis) has forms ranging from prostrate to upright; check the plant label for your cultivar. Creeping types often stay under about 30 cm (1 ft).

What light do junipers need? Most prefer full sun and well-drained soil, and become thin or sparse in heavy shade.

For other ground covers suited to sunny slopes, see sunny slope ground cover that needs little care and types of ground cover plants.

The complete guide to choosing and planting

Types of Ground Cover Plants: Mat-Forming, Mounding and More
Read the guide

Keep exploring

Guides from other topics

All topics →